Skip to main content
Version: v3.0.x LTS

ZSS Error Message Codes

ZSS Error Message Codes

The following error message codes may appear on ZSS log. Use the following message code references and the corresponding reasons and actions to help troubleshoot issues.

ZSS informational messages

ZWES1007I

webContent was not found in plugin definition for '%s'

Reason:

The webContent was not found in plugin definition for <plugin-ID>.

Action:

No action required.

ZWES1008I

libraryVersion was not found in plugin definition for '%s'

Reason:

The libraryVersion was not found in plugin definition for <plugin-ID>.

Action:

No action required.

ZWES1010I

Plugin ID and/or location was not found in '%s'

Reason:

The plugin ID and/or location was not found in <path>.

Action:

No action required.

ZWES1013I

ZSS Server has started. Version '%s' '%s'

Reason:

ZSS Server has started. Version is <zowe-version> <addressing-mode>.

<addressing-mode> is either 31-bit or 64-bit.

Action:

No action required.

ZWES1014I

ZIS status - '%s' (name='%.16s', cmsRC='%d', description='%s', clientVersion='%d')

Reason:

The message shows status of the connection to Privileged Server: ZIS status - <OK or Failure> (name=<Privileged Server Name>, cmsRC=<RC>, description=<description, clientVersion=<version>)

Action:

if Status is OK then no action required. If Status is Failure see check <cmsRC> and description. In the cases listed below check that the ZWESISTC started task is running. If not, start it with the TSO command /S ZWESISTC:

  • cmsRC=12, description='Global area address is NULL'
  • cmsRC=39, description='Cross-memory server abended'
  • cmsRC=47, description='ZVT is NULL'
  • cmsRC=64, description='PC is unavailable'

ZWES1035I

ZSS Server settings: Address='%s', port='%d', protocol='%s'

Reason:

Server is starting using Address=<IP address>, port=<port>, protocol=http or https

Action:

No action required.

ZWES1038I

Server timeouts file '%s' either not found or invalid JSON. ZSS sessions will use the default length of one hour.

Reason:

The server timeouts file <path> either was not found or is invalid JSON. ZSS sessions uses the default length of one hour.

Action:

No action required.

ZWES1039I

Installing '%s' service...

Reason:

<Service> is about to install.

Action:

No action required.

ZWES1061I

TLS settings: keyring '%s', label '%s', password '%s', stash '%s'

Reason:

ZSS uses TLS settings: keyring <keyring> or <p12-file>, label <cert-label>, password "****" or (no password), stash <stash-file> or (no stash).

Action:

No action required.

ZWES1063I

Caching Service settings: gateway host '%s', port %d

Reason:

Caching Service settings are gateway host <Gateway-host>, port <Gateway-port>. HA mode is enabled.

Action:

No action required.

ZWES1064I

Caching Service not configured

Reason:

Caching Service not configured. HA mode is disabled.

Action:

No action required.

ZWES1100I

Product Registration is enabled.

Reason:

Product Registration is enabled.

Action:

No action required.

ZWES1101I

Product Registration is disabled.

Reason:

Product Registration is disabled.

Action:

No action required.

ZWES1102I

Product Registration successful.

Reason:

Product Registration successful.

Action:

No action required.

ZWES1600I

JWT will be configured using JWK URL '%s'

Reason:

JWT will be configured using JSON Web Key(JWK) at URL <url>.

Action:

No action required.

ZWES1601I

Server is ready to accept JWT with(or without) fallback to legacy tokens

Reason:

Server is ready to accept JWT with or without fallback to legacy tokens.

Action:

No action required.

ZSS error messages

ZWES1001E

Log level '%d' is incorrect.

Reason:

The logging level <log-level> is incorrect.

Action:

Verify the <log-level> is in range 0..5.

ZWES1002E

Error in timeouts file: Could not parse config file as a JSON object.

Reason:

There is an error in timeouts file: could not parse config file as a JSON object.

Action:

Verify the timeouts file is a valid JSON.

ZWES1006E

Error while parsing plugin definition file '%s': '%s'.

Reason:

An error occurred while parsing <plugin-definition-file>: <error-details>.

Action:

If you are a plugin developer check <error-details> and fix the error by editing <plugin-definition-file>, otherwise, report the error to the plugin vendor.

ZWES1011E

Error while parsing: '%s'

Reason:

There is an error while parsing: <json-statement>.

Action:

Review the <json-statement> and correct it.

ZWES1016E

Cannot validate file permission, path is not defined.

Reason:

Cannot validate the file permission, path is not defined.

ZWES1017E

Could not get file info on config path='%s': Ret='%d', res='%d'

Reason:

Could not get the file information on config path=<path>: Ret=<return-code>, res=<reason-code>

Action:

Contact support.

ZWES1020E

Skipping validation of file permissions: Disabled during compilation, using file '%s'.

Reason:

Skipping validation of file permissions: disabled during compilation, using the file <file>.

Action:

Contact support.

ZWES1021E

Cannot validate file permissions: Path is not defined.

Reason:

Cannot validate the file permissions: path is not defined.

ZWES1022E

Cannot validate file permissions: Path is for a directory and not a file.

Reason:

Cannot validate the file permissions. Given path is a directory path only without a file.

ZWES1034E

Server startup problem: Address '%s' not valid.

Reason:

IP address nor hostname is not valid.

Action:

Use valid IP address or hostname, e.g. 0.0.0.0.

ZWES1036E

Server startup problem: Ret='%d', res='0x%x'

Reason:

Server has failed to start.

Action:

If the next message is ZWES1037E then refer ZWES1037E. Otherwise, examine the reason code with bpxmtext command, e.g. use bpxmtext 744c7247 if you got res='0x744c7247'

ZWES1037E

This is usually because the server port '%d' is occupied. Is ZSS running twice?

Reason:

ZSS port number is already occupied.

Action:

Check if another ZSS instance is already running, or chose another free port number and restart Zowe.

ZWES1065E

Failed to configure https server, check agent https settings

Reason:

Failed to configure https server.

Action:

Check agent https settings.

ZWES1500E

Failed to generate PassTicket - userId='%s', applId='%s', %s

Reason:

Failed to generate the PassTicket for userId=<user-id>, applId=<application-name>, <error-text>.

Action:

Review your security product to determine that it meets all passTickets requirements.

ZSS warning messages

ZWES1000W

Privileged server name not provided, falling back to default.

Reason:

Privileged server name not defined in configuration file.

Action:

If your privileged server name is ZWESIS_STD then no action required. Otherwise set components.zss.crossMemoryServerName property in configuration to the correct name.

ZWES1004W

Expected plugin ID '%s', instead received '%s'

Reason:

Expected plugin ID is <plugin-ID>, but it was received <wrong-plugin-ID>.

Action:

Verify the plugin JSON definition.

ZWES1005W

Plugin ID was not found in '%s'

Reason:

pluginId property wasn't found in <path-to-pluginDefinition.json> file. The plugin skipped.

Action:

If you are a plugin developer add the pluginId property to the <path-to-pluginDefinition.json> file. Otherwise, contact the plugin vendor.

ZWES1009W

Plugin ID '%s' is NULL and cannot be loaded.

Reason:

The plugin with <plugin-ID> was not succesfully created and cannot be loaded.

Action:

Verify the plugin JSON definition.

ZWES1012W

Could not open pluginsDir '%s': Ret='%d', res='0x%x'

Reason:

Could not open <pluginsDir>: Ret=<return-code>, res=<reason-code>

Action:

Check that <pluginsDir> exists and allows reading. Examine the reason code with bpxmtext command for additional information.

ZWES1060W

Failed to init TLS environment, rc=%d(%s)

Reason:

Failed to initialized TLS environment GSKit return code <rc>(<description>)

Action:

Ensure that the ZSS certificate is configured correctly. Check GSKit return code and description for additional information.

ZWES1103W

Product Registration failed, RC = %d

Reason:

Failed to register ZSS.

Action:

Examine the return code at [https://www.ibm.com/docs/en/zos/2.2.0?topic=requeststatus-return-codes] and correct the error.

ZWES1200W

Could not %s file '%s': Ret='%d', res='%d'

Reason:

Could not <action> file <file>, return code is <return-code>, resason code is <reason-code>.

<action> specifies for which file operation a problem was detected.

Action:

No action required.

ZWES1201W

Could not %s file '%s': Ret='%d', res='%d'

Reason:

Unixfile REST Service could not <action> file <filename>: Ret=<return-code>, res=<reason-code>

Action:

Action depends on return/reason code. For additional information examine the reason code with the bpxmtext command.

ZWES1202W

Transfer type has not been set.

Reason:

The transfer type was not set.

Action:

No action required.

ZWES1103W

Could not get metadata for file '%s': Ret='%d', res='%d'

Reason:

Unixfile REST Service could not get metadata for file <filename>: Ret=<return-code>, res=<reason-code>

Action:

Action depends on return/reason code. For additional information examine the reason code with bpxmtext command.

ZWES1200W

Could not %s file '%s': Ret='%d', res='%d'

Reason:

Could not <action> file <file>, return code is <return-code>, resason code is <reason-code>.

<action> specifies for which file operation a problem was detected.

Action:

No action required.

ZWES1202W

Transfer type has not been set.

Reason:

The transfer type was not set.

Action:

No action required.

ZWES1400W

Non standard class provided for '%s' '%s', ending request...

Reason:

Non standard class was provided for <HTTP-setting> <HTTP-method>, the request was ended.

ZWES1401W

Profile not provided for profiles GET, ending request...

Reason:

The profile not provided for profiles GET, the request was ended.

ZWES1402W

Profile name required for '%s' '%s'

Reason:

The profile name is required for <HTTP-setting> <HTTP-method>

ZWES1403W

User ID required for user POST/PUT

Reason:

The user ID is required for user POST or PUT.

ZWES1404W

Body not provided for user POST/PUT, ending request...

Reason:

The body was not provided for user POST or PUT, the request was ended.

ZWES1406W

Unknown access type '%d' provided for user POST/PUT, ending request...

Reason:

Unknown access type <access-type> provided for user POST or PUT, the request was ended.

ZWES1407W

Access list can only be retrieved in bulk, ending request...

Reason:

The access list can only be retrieved in bulk, the request was ended.

ZWES1408W

Access list buffer with size '%u' not allocated, ending request...

Reason:

The access list buffer with size <size> was not allocated, the request was ended.

ZWES1409W

Access list size out of range '%u', ending request...

Reason:

The size of access list is out of range <number>, the request was ended.

ZWES1410W

Access list entry name required for access list DELETE

Reason:

The access list entry name is required for access list DELETE.

ZWES1411W

Class-mgmt query string is invalid, ending request...

Reason:

`Class-mgmt`` query string is invalid, the request was ended.

ZWES1412W

Group name required for '%s' '%s'

Reason:

The group name required for <HTTP-setting> <HTTP-method>.

ZWES1413W

Body not provided for group POST, ending request...

Reason:

The body was not provided for group POST, the request was ended.

ZWES1414W

Superior not provided for group POST, ending request...

Reason:

Superior not provided for group POST, the request was ended.

ZWES1415W

Bad superior group provided for group POST, ending request...

Reason:

Bad superior group was provided for group POST, the request was ended.

ZWES1416W

Access type not provided for user POST/PUT, ending request...

Reason:

The access type was not provided for user POST or PUT, the request was ended.

ZWES1417W

Unknown access type, use [USE, CREATE, CONNECT, JOIN]

Reason:

Unknown access type, use USE, CREATE, CONNECT or JOIN.

ZWES1418W

Access list will be re-allocated with capacity '%u'

Reason:

The access list will be re-allocated with capacity <size>.

Action:

No action required.

ZWES1419W

Group-mgmt query string is invalid, ending request...

Reason:

<Group-mgmt> query string is invalid and the requested was ended.

ZWES1602W

JWK is in unrecognized format

Reason:

JSON Web Key(JWK) is in unrecognized format.

Action:

Report an issue at [https://github.com/zowe/zlux/issues]

ZWES1603W

Failed to construct public key using JWK

Reason:

JSON Web Key(JWK) has invalid public key info.

Action:

Report an issue at [https://github.com/zowe/zlux/issues]

ZWES1604W

JWK: failed to init HTTP context, ensure that APIML and TLS settings are correct

Reason:

Failed to init HTTP context for requesting JSON Web Key(JWK).

Action:

Check the zowe keystore configuration and specification of it within the zowe server config.

ZWES1605W

Server will not accept JWT

Reason:

ZSS Server will not accept JWT.

Action:

No action required.

ZWES1606W

Failed to get JWK - %s, retry in %d seconds

Reason:

Failed to get JWK - <reason>, retry in <n> seconds. ZSS Server was unable to get JSON Web Key(JWK), it will try to repeat the attempt in <n> seconds.

Action:

  • This message is repeated each <n> seconds. After a succesfull attempt, the message ZWES1601I is displayed and no action is required.
  • If message ZWES1601I does not appear, but rather the message ZWES1606W Failed to get JWK. rc=failed to init HTTP request (9), rsn=TLS error (17). Retry in 10 seconds, consider the following:
    • TLSv1.3 recommends encryption ChaCha20-Poly1305. However, this encryption may be restricted by the ICSF FIPS 140-2 policy. When ZSS requests ChaCha20-Poly1305, such request will fail.
    • Modify the zowe.yaml to use TLSv1.2 to avoid the problem with ChaCha20-Poly1305:
zowe:
network:
server:
tls:
maxTls: "TLSv1.2"
client:
tls:
maxTls: "TLSv1.2"

ZWES0054E

ZIS AUX Server started in wrong key 8

Reasons:

authPluginLib was missing in the ZWESASTC JCL and the ZWESISTC JCL.

Action:

When the Zowe STC userid has read access to the profile SAF OMVSAPPL, the ZWESASTC task will be able to successfully be started on an as-needed basis from ZWESISTC.